Sewing Machine Needle Keeps Breaking - How To Fix It?

A sewing machine needle breaking can be a frustrating experience for a sewer. This happens when the needle becomes bent or broken while it is in the fabric. It can cause the fabric to bunch up and can be difficult to remove without damaging the fabric. It is important to take care of your sewing machine needles. When they are new, it is best to never use sharp or pointed objects to pry the needle out of fabric. This can damage the needle and cause it to break more easily. Today we'll learn how to fix it and even better, prevent the unpleasant situation.

Causes of a broken needle:

Sewing machine needles are designed to pierce the fabric and then pass through the hole in the needle plate to form a stitch. A broken needle can cause problems with the stitch formation and lead to skipped stitches or even fabric damage. There are several reasons why a needle might break while sewing: 

1) Improper use - using the wrong size needle for the thread, trying to sew too thick of fabric, etc.

2) Old or worn needles - over time, needles can become dull and more prone to breaking.

3) Damaged needle - a nick or dent in the shank of the needle can weaken it and make it more likely to break.

4) Bent needle - if a needle is bent too much, it can snap off at the bend.

Here's the video that lists 15 possible reasons why a needle might break while sewing:

How to fix a broken needle:

Sewing machines are a necessary evil in most households. They're often used to sew on buttons or fix a hem, but when they break, they can be incredibly frustrating. If your sewing machine needle has broken off inside the machine, don't panic! There are a few simple steps you can take to repair it at home:

1) Turn off the machine and unplug it. 

2) Remove the needle plate. This will reveal the bobbin case and bobbin. 

3) Look at where the needle broke off and use a pair of pliers to remove what's left of the needle. Be careful not to damage the machine. 

4) Take a new needle and insert it into the Singer sewing machine. Make sure that it is inserted correctly by looking at the flat side of the needle and lining it up with the markings on the machine. If it isn't inserted correctly, it could bend or break when you start to sew. 

5) Replace the bobbin case and screw it in place.

Prevention is better than cure

Sewing machine needles seem to break easily. Prevention is better than cure. Here are some tips to avoid a broken needle in the first place:

1. Use the correct needle for the fabric you are sewing. A needle that is too small or too large will be more likely to break.

2. Keep your sewing machine well-lubricated. This will help keep the moving parts of the machine running smoothly, and it will also help reduce friction on the needle.

3. Make sure that your fabric is not bunched up when you are sewing. This can put a lot of stress on the needle, which can lead to it breaking.

4. Do not overload your sewing machine with too much fabric. This can also put stress on the needle, which can lead to it breaking.

5. Change your needles often, especially if you are sewing heavyweight fabrics or using a lot of pressure when stitching.

6. Inspect the needle before use. Make sure there are no cracks or bends in the shaft.

7. Do not force the needle through the fabric. Let the machine do the work.

Conclusion:

In conclusion, the best way to prevent your sewing machine needle from breaking is to be aware of the factors that can contribute to its breakage. Be sure to use the correct type of needle for your fabric, keep your machine well-lubricated, and use a stabilizer when necessary. If your needle does break, don't worry - there are ways to fix it. Just be sure to take your time and follow the steps correctly.